{ Discover the Designer in You }
What is Quarter Sawn Wood?

What is Quarter Sawn Wood?

Did you know that the shape of the grain on a piece of wood can be controlled by the way the boards are cut?  If you make a conscious, careful choice about the boards you use in your home, you can get just the look you want.

Wood can be cut in several different ways.  The most common, and the one with the least waste (and, therefore, the least expensive) is “plain” sawing.  In this cutting method, the log is cut straight across the width of the tree.  This is illustrated in the photo below:

quartersawn wood

Photo courtesy Horizon Custom Homes

Quarter sawn boards, on the other hand, are cut at a 90 degree angle to the center of the log.  So, each quarter of the log is cut into boards.  This results in more waste, which makes boards cut this way more expensive.  However, it also creates a completely different look to the boards which many people find desirable.

plain sawn oak kitchen

Photo courtest Landsted Companies

The photo above illustrates what plain sawn oak looks like in a kitchen.  Plain sawing oak results in a very pronounced “cathedral” grain pattern; while some homeowners love the look, others prefer to tone the grain down a bit.  The photo below shows another oak kitchen, but this time features cabinets made with quarter sawn oak:

quarter sawn oak kitchen

Photo courtesy of Landsted Companies

As you can see, the grain is much straighter.  Using quarter sawn wood eliminates the cathedral grain that many folks dislike in plain sawn oak.  Quarter sawn oak is also used in furniture making.  Mission style furniture, such as the pieces made by Stickley, features quarter sawn oak.  The simple grain pattern fits the philosophy of the Arts and Crafts movement, which strove to simplify the elaborate ornament of the Victorian era.

Stickely buffet

Photo courtesy Stickley

Depending on the look you prefer, you can specify that your new cabinetry, doors and trim be made in either quarter sawn or plain sawn wood.  Be prepared to pay more for the quarter sawn variety.  To save on the cost of the overall project, you can also consider using plain sawn lumber on your trim and/or doors, while using quarter sawn wood for your cabinetry.  If you keep the wood species and stain color consistent, the change in grain pattern will be less noticeable.

 

Pin It

Leave a reply

CAPTCHA
Change the CAPTCHA codeSpeak the CAPTCHA code
 

Secured for spam by MLW and Associates, LLP's Super CAPTCHASecured by Super-CAPTCHA Developed by Goldsboro Web Development..